WEST HAVEN
2008 West 2550 South
West Haven, UT 84401
(801) 627-8156
SALT LAKE CITY
270 West 2950 South
Salt Lake City, Utah 84115
(801) 975-0190
"We Hold It All Together!"
Toll Free:
(866) 931-8027
HOME
PRODUCTS
PROMOTIONS | SPECIALS
ABOUT US
LOCATIONS
SUPPLIERS | PARTNERS
SEISMIC
CREDIT APP
BROWSE CATEGORIES
> Bolt
> Nail
> Nut
> Screws
> Staple
> Washer
Abrasives
Access Doors | Vents | Roof Access
Adhesives | Sealants | Tape
Air & Pneumatic Tools
Diamond Products
Drill Bits and Drilling Accessories
Electrical Products and Equipment
Electronics | Batteries
Erosion Control | SWPPP
Fasteners | Anchors
Fastening Pins & Inserts
Hardware Supplies
Ladders | Platforms | Scaffolding
Leveling | Measuring | Surveying
Lighting Supplies
Power Tool Accessories
Power Tools
Radios
Rebar and Wire Mesh
Safety Equipment and Products
Saw Blades
Shop Vacuums
Sports Drinks and Thirst Quenchers
Strapping
Structural Hardware
Tiles and Detectable Warning Pads
Tool Storage | Job Site Boxes | Truck Boxes | Transfer Tanks
Home
/
Categories
/
Fasteners | Anchors
/
Wall-Ties and Anchors
/
Search:
MASA/MASAP Mudsill Anchors
Simpson Strong-Tie
(click image to enlarge)
SKU / Product Info
Quantity
masaz
Material: 16 gauge/Finish: Galvanized, all available in ZMAX® coating. See Corrosion Information.
Quick Overview
Use all specified fasteners.
MASA/MASAP
- Concrete shall have a minimum f'c = 2500 psi.
- Spalling — Full loads apply for spalls up to a maximum height of 1 1/4" and a maximum depth of 7/8". Any exposed portion of the mudsill anchor must be protected against possible corrosion.
- For prescriptive anchor spacing refer to table.
- Testing shows that these mudsill anchors can be used in lieu of code required anchor bolts and square washer in high seismic zones. Refer to flier F-C-MASA for additional information.
- Minimum MASA end distance is 4" and minimum center-to-center spacing is 8" for full load.
- For continuous load path, MASA should be installed on the same side of wall as uplift connectors.
Interested in this item or want more information?
Call Mon. through Fri. 6:30 AM - 5:00 PM PST
Phone: (866) 931-8027
Email:
Sales@CFCdelivers.com
Can't find what you want? Give us a call and we can help you find it.
Details
Mudsill anchors have always been a time-saving alternative to anchor bolts, and the MASA anchors provide even greater load-carrying capacity alternative for 5/8" and 1/2" mudsill anchor bolts on 2x, double-2x and 3x mudsills. It also eliminates the need for 3" square plate washers for seismic design and, in some cases, has load capacities that meet or exceed the parallel and perpendicular to plate shear capacity of other cast-in-place anchors. Two versions of the MASA are available – the standard MASA for installation on standard forms and the MASAP for panelized forms
The MASA and MASAP are code listed by ICC-ES under the 2006, 2009 and 2012 IBC® and IRC® and have been tested to meet the requirements of ICC-ES acceptance criteria AC-398 for cracked and uncracked concrete.
Additional Information
Manufacturer: Simpson Strong-Tie
For More Information on the MASA/MASAP Mudsill Anchors,
[Click Here]
to Link to Manufacturer Web Site
Search:
© 2008- CFC | All Rights Reserved
Powered by 48ws.com